Product
Alaap
Alaap high fidelity stereo wireless music system
Tech Specifications

highlights
- Wide stereo sound-stage: Critical integration of transducer, enclosure,
crossover and DSP for high fidelity stereophonic sound.
- Highly rigid wooden cabinet: A rigid handmade enclosure allows you to
focus on the music, and minimises cabinet vibration.
- D Class high power amplifiers: Clarity and loudness result from this
lightweight, efficient design.
- Glass-fiber cone woofer: Deep bass and clear low mids to give a warm,
full sound.
- Polycone tweeters: Complete the sonics with sparkling highs.
- Built-in limiter: Enjoy long hours of clear, distortion-less and
fatigue-free sound
- USB Audio, Optical and Analog stereo input, other than BT: A host of
connections to maximise access to your musical content
- Duet Mode: Link two Alaap/ Bandish speakers using this mode to
cater to a wider area
- Full-featured infra-red remote control: Control on board or remotely via a the sleek IR remote.
Specifications
DESCRIPTION | Powered tabletop stereo speaker |
ENCLOSURE | MDF |
ENCLOSURE TYPE | Bass reflex, vented |
TRANSDUCERS | 2 x 4" woofer, 2 x 1/2" tweeter |
INPUTS - ANALOG | AUX (stereo unbalanced input) |
INPUTS - DIGITAL | Optical, USB audio, BT stereo |
CONTROLS & SWITCHES (TOP, TACT SWITCH) | Standby power Volume up/down cum track forward/ reverse for USB audio Input select - 4 switches for 4 inputs Play/Pause for USB audio |
CONTROLS & SWITCHES (REAR) | Rocker type power switch for mains power |
INDICATORS (TOP, LED) | Standby power Volume up/down cum track forward/ reverse for USB audio Input select - 4 switches for 4 inputs Play/Pause for USB audio |
OTHERS | 5V DC OUT through USB socket, for charging |
REMOTE CONTROL | IR type remote control with hand-held remote control unit Keys - Standby, Volume Up/Down, Mute, Input Selection (4 keys) |
OUTPUT POWER | 120 watt |
THD + NOISE | 0.3% max at rated power |
ACOUSTIC FREQUENCY RESPONSE (-6dB) | 45Hz ~ 20kHz |
AMPLIFIER TYPE | Class D |
POWER SUPPLY TYPE | SMPS |
MAINS OPERATING VOLTAGE RANGE | 90 - 264 volt AC |
FINISH | Natural wood veneer |
GRILL | Metal mesh covered with black grill cloth for woofer and tweeter |
DIMENSIONS (WXHXD) MM | 393 x 144 x 166 |
NET WEIGHT | 5.2kg |
GROSS WEIGHT | 6.5kg |
SET UP YOUR SYSTEM
MORE ABOUT THE PRODUCT
Duet Mode
Link two Alaap/ Bandish speakers using this mode to cater to a wider area
Can work with any of these combinations
• Alaap + Alaap
• Bandish + Bandish
STEP 1
If the serial number of your set is. before 027800144 for Alaap and
before 027900138 for Bandish, you need to update the firmware first.
Please download the firmware (links given below*) onto a pen
drive.
Please ensure there is no other file in the pen drive.
Turn system on with the rocker type power switch at rear. Press power button on keyboard. Insert the pen drive into the “USB” marked slot at the rear of both units (Alaap/Bandish). You will hear a tone when the pen drive is inserted. Note: it does not matter which input is selected while inserting the pen drive.
After a few seconds, all the LEDs on the top panel will blink and the unit will enter standby mode (standby LED will glow). This indicates that the firmware has been updated. Remove pen drive and switch on the unit with standby button on keyboard or remote.
For units with Serial no.s outside those mentioned above, Step 1 is not required
STEP 2
Power on unit 1 and unit 2. (Turn system on with the rocker type power
switch at rear. Press power button on keyboard)
STEP 3
Select Bluetooth (BT) through keyboard or remote.
Next long press BT button on keyboard of unit 1 till the standby power
LED flashes. The Bluetooth LED (BT) will also flash.
STEP 4
Repeat above procedure for unit 2
STEP 5
After a few seconds, the standby power LED in both the units will become
steady. The Bluetooth LED (BT) in one unit will become steady. This
is the slave unit. The Bluetooth LED (BT) on the other will
continue to flash. This is the master unit. This indicates that
unit 1 has been paired to unit 2.
STEP 6
Pair your phone or other Bluetooth audio source to unit 2. The Bluetooth
LED (BT) on the master unit will become steady after pairing.
To exit duet mode, simply switch off the unit with the power switch at
the rear
FIRMWARE
Please download onto a pen drive.
Please ensure there is no other file on the pen drive
Download
Reviews

Amol Khiste

Amol Khiste

Sachin Sogal

Amazon Customer

Dr Michael Paschal

Sourav Banerjee

Debraj Bhattacharya

Kozacs

D Dasgupta

Sachin Sogal

AK

Sourav Banerjee

Sonic superiority

Ehsaan Noorani

Akash Banerjee (DeshBhakt)

Anandita Ghose

Niladri Kumar

Tanmay Mehta

Nishant Padhiar (Stuff Magazine)

Tanmay Mehta - Unboxing the Bandish
Testimonials

Emil Snabb, Cloud Forest Studio

LONGMAN LUK
Musician

ADAM, RUBEN & AL
Musicians

ROBIN REUMERS
SAE Brussels Manager

DIGITAL FARM ANIMALS

XAVIER REDEYE
Master Sound Engineer

MARK 'TUFTY' EVANS
Producer And Mixer

JAYSON DEZUZIO
Sound Engineer

KEERTHANA STUDIOS

BIG TASTE
Sound Engineer

ANDRIY KHLYVNYUK
Lead Singer Boombox, Ukraine

TOM VAN ACHTE
Mastering And QC Engineer At Auro 3D

UDAY BENEGAL
Lead Singer, Principal Songwriter, Indus Creed

GINO BANKS
India's Most Versatile Drummer

KYLE SHEARER
Sound Engineer

LOUIZ BANKS
Indian Film Composer, Record Producer, Keyboardist, And Singer

JOSH BLAIR
Producer/ Engineer

ANUPAM ROY
Indian Singer, Songwriter And Poet

LESLIE BRATHWAITE
Grammy Nominated Mix Engineer

ZAKIR HUSSAIN
Indian Tabla Virtuoso, Composer, Percussionist

TOM LORD ALGE
Grammy Award Winning Sound Engineer

BOB POWER
Grammy Award Winning Recording Producer And Engineer

EDDIE KRAMER
Grammy Award Winning Sound Engineer