SRP SERIES

SRP 800

SRP 800 active monitors

The SRP 800 is a new high power active reference monitor. This SRP is excellent for loud monitoring without any audible loss in detail. The enclosure is pressure die cast aluminum that maximizes rigidity and lends it a unique form. The silk dome tweeter is nested in a custom waveguide to produce on and off axis linearity and a wide, detailed soundstage. The 8 " kevlar woofer produces deep bass and exceptional transient response. A new 175 + 100 watt biamplifier drives the transducers optimally while providing adequate headroom and dynamics. The maximum SPL measures in at an impressive 112dB. DSP based internal processing with high quality ADC and DAC is employed for the crossover and also provides the 0.75dB step calibrated HF and LF room compensation EQs at the rear. On the front is a level control ranging from mute to +6dB with centre detent at 0dB. Tapped inserts at the rear and bottom allow for various mounting options. The SRP 800 accepts XLR balanced inputs and is available in the following durable powder coat finishes: rich black, charcoal grey or snow white.

MRP : ₹ 73,720

Buy it online

Tech Specifications

highlights

  • Rigid Aluminum die cast enclosure
  • Class H: Biamplifier
  • 8" kevlar woofer
  • 1" HF in custom waveguide
  • Discrete EQ in 0.75 dB steps
  • Internal DSP balance

Specifications

DESCRIPTION 2 way biamplifier speaker
ENCLOSURE Pressure die cast aluminum, vented, through rear-firing aerodynamic port
TRANSDUCER COMPLEMENTS: HF Magnetically shielded 26mm silk dome tweeter with custom waveguide
TRANSDUCER COMPLEMENTS: LF Magnetically shielded 8" kevlar cone woofer in die-cast chassis
AMPLIFIER POWER BEFORE CLIPPING LF: 150 W, HF: 100 W
AMPLIFIER THD AT RATED POWER < 0.04%
MAX SPL @ 1M 112 dB
FREQUENCY RESPONSE 42 Hz ~ 22 kHz (+/- 2 dB)
USABLE FREQUENCY RANGE (-10 dB) 37 Hz ~ 25 kHz
CROSSOVER FREQUENCY 1.8 kHz
CMRR >65 dB
INPUTS Fully balanced through XLR & TRS sockets
INPUT LEVEL FOR 90 dB SPL @ 1M +7 dBU
CONTROLS - FRONT Power Switch and Gain Control
CONTROLS - REAR Low shelving, High shelving, Bass roll-off
PROTECTION Over current, Overheat , RFI, Switch on/ off transients
INDICATOR Power ON /OFF
GAIN CONTROL RANGE -70 dB ~ +10 dB, 0 dB at (detented) centre
HIGH SHELVING EQ 4 kHz ~ 20 kHz, -3 dB ~ +3 dB in 0.75 dB steps
LOW SHELVING EQ 50 Hz ~ 250 Hz, -3 dB ~ +3 dB in 0.75 dB steps
BASS ROLL-OFF 63 Hz, 12 dB/ octave
SIGNAL TO NOISE RATIO (AT UNITY GAIN) > 90 dB, referred to full output
FINISH Powder coated (grey)
COLOURS Grey/ White/ Black
DIMENSIONS (HxWxD) mm 434 x 291 x 280
POWER CONSUMPTION 345 VA Max.
POWER REQUIREMENT 230 VAC, ±10%, 50 Hz, 120 V optional
NET WEIGHT 17 kg
WALL MOUNT BRACKET SRP WB3
MOUNTING OPTIONS 4 x M6 inserts on rear, 4 x M6 inserts on bottom
NOTE: Due to continuous improvements, all specifications are subject to change

SET UP YOUR SYSTEM

STEREO SET-UP

The following sketch shows an optimum set-up for a stereo system. The important part here is to place the speakers such that the head of the listener and the two monitors lie at the vertices of an equilateral triangle.

SURROUND SOUND SET-UP

The following sketch shows a 5.1 set-up. It is recommended to have a symmetrical listening position with the front left and right speakers facing the listener and the surround speakers located at the back of the listener.

 

Distance from walls

While placing speakers, make sure that they are at least 40 cm away from any reflecting surface. This will help minimise bumps in the low-frequency response due to reflections, and also ensure that the rear-mounting port is unobstructed. It is also required to ensure that the heat sinks at the back have adequate ventilation, for uninterrupted operation.

Reviews

 

write a review

Leave a review

Write your own review

How do you rate this product?

Make an enquiry

Send us a message

Enquiry form

More SRP SERIES Products