SRP SERIES
SRP 400
SRP 400 compact active reference monitor
The SRP 400 is the most compact active reference monitor in the new SRP line. It is an excellent reference to understand how mixes translate to smaller speakers. The enclosure is pressure die cast aluminum that maximizes rigidity and lends it a unique form. The silk dome tweeter is nested in a custom waveguide to produce on and off axis linearity and a wide, detailed soundstage. The 4.5" CURV cone woofer produces impressive bass and transient response. A new 25 + 25 watt biamplifier drives the transducers optimally while providing adequate headroom and dynamics. The maximum SPL measures in at an impressive 100dB. Room compensation HF and LF tilts are available at the rear. On the front is a level control ranging from mute to +6dB with centre detent at 0dB. Tapped inserts at the rear and bottom allow for various mounting options. The SRP 400 accepts XLR and TRS balanced inputs and is available in the following durable powder coat finishes: rich black, charcoal grey or snow white.
Tech Specifications

highlights
- Rigid Aluminum die cast enclosure
- Class AB: Biamplifier
- 4.5" kevlar woofer
- 1" HF in custom waveguide
- High, Low Shelving EQs
Specifications
DESCRIPTION | 2 way nearfield active monitor |
---|---|
ENCLOSURE | Pressure die-cast aluminum, vented, through front-firing aerodynamic port |
TRANSDUCER COMPLEMENTS: HF | Magnetically shielded 26mm silk dome with custom waveguide |
TRANSDUCER COMPLEMENTS: LF | Magnetically shielded 4.5" CURV cone woofer |
AMPLIFIER POWER BEFORE CLIPPING | LF: 25 W, HF: 25 W |
AMPLIFIER THD AT RATED POWER | < 0.1 % |
MAX SPL @ 1M | 100 dB |
FREQUENCY RESPONSE | 75 Hz ~ 22 kHz (+/- 2 dB) |
USABLE FREQUENCY RANGE (-10 dB) | 65 Hz ~ 25 kHz |
CROSSOVER FREQUENCY | 3.0 kHz |
CMRR | > 65 dB |
INPUTS | Fully balanced through XLR & TRS sockets |
INPUT LEVEL FOR 90 dB SPL @ 1M | -2 dBU |
CONTROLS - FRONT | Gain, Power |
CONTROLS - REAR | Bass tilt, Treble tilt |
INDICATOR | Power ON /OFF |
GAIN CONTROL RANGE | -∞ to +6 dB, 0 dB at center position |
BASS ROLL-OFF | 100 Hz, 6 dB/octave |
SIGNAL TO NOISE RATIO (AT UNITY GAIN) | > 90 dB, referred to full output |
FINISH | Powder coated (grey/white/black) |
COLOURS | Grey/ White/ Black |
DIMENSIONS (HxWxD) mm | 160 x 232 x 155 |
POWER CONSUMPTION | 70 VA Max. |
POWER REQUIREMENT | 230 VAC, ±10%, 50 Hz; 120 V optional |
NET WEIGHT | 4.4 kg |
WALL MOUNT BRACKET | SRP WB1 |
MOUNTING OPTIONS | 2 x M6 inserts on rear 4 x M6 inserts on base |
SET UP YOUR SYSTEM
STEREO SET-UP
The following sketch shows an optimum set-up for a stereo system. The important part here is to place the speakers such that the head of the listener and the two monitors lie at the vertices of an equilateral triangle.
SURROUND SOUND SET-UP
The following sketch shows a 5.1 set-up. It is recommended to have a symmetrical listening position with the front left and right speakers facing the listener and the surround speakers located at the back of the listener.
Distance from walls
While placing speakers, make sure that they are at least 40 cm away from any reflecting surface. This will help minimise bumps in the low-frequency response due to reflections, and also ensure that the rear-mounting port is unobstructed. It is also required to ensure that the heat sinks at the back have adequate ventilation, for uninterrupted operation.
Reviews

EDDIE KRAMER

BOB POWER

TOM LORD ALGE

ZAKIR HUSSAIN

LESLIE BRATHWAITE

ANUPAM ROY


MAREK ROMANOWSKI, Maro Records

JOSH BLAIR


MATEEN ANSARY


PABLO INFINITY, AUDIOKEMESTRY

LOUIZ BANKS

KYLE SHEARER

GINO BANKS

UDAY BENEGAL


THEJUS NAIR

TOM VAN ACHTE

ANDRIY KHLYVNYUK

JAYSON DEZUZIO

GEORGE NECOLA, GEARSLUTZ

MIXDOWN, AUSTRALIA
