PM 100V2 production monitor

The PM is our range of professional active loudspeakers for the producing musician. In home or project studios, for tracking and for mixing, the PM 100V2 is ideal.

23,000MRP : 23,000

×

Inclusive of all taxes

banner-bg

Highly braced MDF enclosure

Class AB: Biamplifier

Premium transducers

Highly braced MDF enclosure

The enclosure is heavily braced double MDF panels. This renders the cabinet rigid. To add, the integrated isolation base minimises residual vibrations.

banner-bg
banner-bg

Class D biamplifier

The biamplifier is Sonodyne Class D design providing  80W + 50W for the PM 100V2.

banner-bg

Premium Transducers

 

The woofer is PP, and the tweeter is silk, both ferro fluid cooled.

 

banner-bg

High, Low Shelving EQs

 

On board controls include HF, LF trims and bass roll-off. Gain trim control of -6 dB to +6 dB is also present.

 

banner-bg

High in detail and LF extension

For loud and clear reproduction at an exceptional value, the PM Series is an unbeatable option.

Technical Specifications

SYSTEM

  • DESCRIPTION

    2-way active monitor

  • TRANSDUCER COMPLEMENTS

    LF: 6" injection-moulded PP cone woofer HF: 26mm silk-dome neodymium magnet tweeter

  • ENCLOSURE

    MDF

  • ENCLOSURE TYPE

    Vented, through rear-firing aerodynamic port

  • OVERALL FREQUENCY RESPONSE

    65Hz ~ 20kHz, (±3dB)

  • USABLE FREQUENCY RESPONSE

    55Hz ~ 22kHz, (±10dB)

  • MAX SPL AT HALF SPACE

    107dB

  • CROSSOVER FREQUENCY

    2.5kHz

  • AMPLIFIER POWER BEFORE CLIPPING

    LF: 80W HF: 50W

  • AMPLIFIER TYPE

    Class D

  • S/N RATIO (AT UNITY GAIN)

    >90 dB, referred to full output

  • THD AT RATED POWER

    <0.04 %

  • CMRR

    >65dB

  • INPUT LEVEL FOR 90dB SPL AT 1M

    0dBU

  • INPUT IMPEDANCE

    22KΩ

CONTROLS

  • INPUT

    One fully balanced XLR socket One unbalanced RCA socket

  • GAIN CONTROL RANGE

    -70dB to +6dB

  • BASS TILT

    -2dB , -4dB , -6dB @ 80Hz

  • TREBLE TILT

    -2dB @ 15kHz

  • BASS ROLL-OFF

    80Hz, 6dB/ octave

CONTROLS & SWITCHES

  • REAR

    Power switch, volume control, 4 DIP switches for bass/ treble tilts & bass roll-off

  • INDICATORS

    Power ON /OFF, Overvoltage protect

GENERAL

  • POWER REQUIREMENT

    230VAC, ±10%, 50Hz

  • POWER CONSUMPTION

    200VA Max.

  • PROTECTION

    Over current, Overheat, RFI, Switch on/ off, Mains overvoltage

  • FINISH

    Black PVC with black painted front

  • DIMENSIONS (WxHxD)

    220 x 332 x 240

  • NET WEIGHT

    10.0kg

SYSTEM

  • DESCRIPTION

    2-way active monitor

  • TRANSDUCER COMPLEMENTS

    LF: 6" injection-moulded PP cone woofer HF: 26mm silk-dome neodymium magnet tweeter

  • ENCLOSURE

    MDF

  • ENCLOSURE TYPE

    Vented, through rear-firing aerodynamic port

  • OVERALL FREQUENCY RESPONSE

    65Hz ~ 20kHz, (±3dB)

  • USABLE FREQUENCY RESPONSE

    55Hz ~ 22kHz, (±10dB)

  • MAX SPL AT HALF SPACE

    107dB

  • CROSSOVER FREQUENCY

    2.5kHz

  • AMPLIFIER POWER BEFORE CLIPPING

    LF: 80W HF: 50W

  • AMPLIFIER TYPE

    Class D

  • S/N RATIO (AT UNITY GAIN)

    >90 dB, referred to full output

  • THD AT RATED POWER

    <0.04 %

  • CMRR

    >65dB

  • INPUT LEVEL FOR 90dB SPL AT 1M

    0dBU

  • INPUT IMPEDANCE

    22KΩ

CONTROLS

  • INPUT

    One fully balanced XLR socket One unbalanced RCA socket

  • GAIN CONTROL RANGE

    -70dB to +6dB

  • BASS TILT

    -2dB , -4dB , -6dB @ 80Hz

  • TREBLE TILT

    -2dB @ 15kHz

  • BASS ROLL-OFF

    80Hz, 6dB/ octave

CONTROLS & SWITCHES

  • REAR

    Power switch, volume control, 4 DIP switches for bass/ treble tilts & bass roll-off

  • INDICATORS

    Power ON /OFF, Overvoltage protect

GENERAL

  • POWER REQUIREMENT

    230VAC, ±10%, 50Hz

  • POWER CONSUMPTION

    200VA Max.

  • PROTECTION

    Over current, Overheat, RFI, Switch on/ off, Mains overvoltage

  • FINISH

    Black PVC with black painted front

  • DIMENSIONS (WxHxD)

    220 x 332 x 240

  • NET WEIGHT

    10.0kg

banner-bg

Included in the box

  • 1 x PM 100V2
  • 1 x Power cord
  • Owners Manual

The speaker best suited for you

TRANSDUCER COMPLEMENTS LF: 6" injection-moulded PP cone woofer HF: 26mm silk-dome neodymium magnet tweeter LF: 5" injection-moulded PP cone woofer HF: 26mm silk-dome neodymium magnet tweeter LF: 4 inch glass fibre cone woofer, HF: 1 inch silk dome neodymium magnet tweeter with elliptical waveguide
AMPLIFIER POWER BEFORE CLIPPING LF: 80W HF: 50W LF: 45W HF: 45W 30W + 30W
NET WEIGHT 10.0kg 6.3kg Passive speaker: 2.6kg Active speaker: 3.2kg
DIMENSIONS (WxHxD) 220 x 332 x 240 194 x 306 x 210 PRODUCT: 160mm x 230mm x 190mm SHIPPING: 400mm x 285mm x 245mm

Reviews

 

write a review

Leave a review

Write your own review

How do you rate this product?

Make an enquiry

Send us a message

Enquiry form

Our Story

banner-bg

Sonodyne brings over 50 years of exceptional sonic value to its new wireless range.

Started in 1970 by IIT engineer, Ashoke Mukherjee, Sonodyne focussed on innovation. A range of high fidelity stereo systems were introduced including turntables, cassette decks, amplifiers and speakers. Built with great attention to design and performance, Sonodyne products have a cult following among audiophiles.

With R&D at the core, a range of professional products were developed initially for studio, and then for installation, cinema and live sound applications. Professional users, globally, have endorsed the Sonodyne promise of exceptional sonic value. With vertically integrated factories in Mumbai and Kolkata, Sonodyne products are built to high standards of performance and reliability.

In this digital era, our new range of wireless speakers showcases our relentless commitment to high fidelity. Today, music is on the cloud, accessible on phone, tablet, PC, or TV. There is continuous improvement in streaming quality. Look no further. There is a Sonodyne solution for your evolved streaming need.

PM 100V2
23,000 MRP : 23,000
×