SRT SERIES
SRT 101
SRT 101 2 way passive speaker
The SRT 101 is a high quality compact speaker. From a compact enclosure it delivers unprecedented SPL, dynamics, and frequency bandwidth. It can be used for all channels for installation in small rooms. In larger rooms, it can be used for surround channels. The SRT 101 must be used in conjuction with the SRT 101CS.
Tech Specifications
highlights
- 2 way passive speaker with dedicated controller
- Aluminium-wood hybrid enclosure
- Kevlar LF driver
- High frequency nested in custom waveguide
Specifications
DESCRIPTION | 2 way shallow profile surround speaker |
---|---|
TRANSDUCER COMPLEMENTS: HF | 26mm silk dome neodymium magnet tweeter with waveguide |
TRANSDUCER COMPLEMENTS: LF | 1 x 6" Kevlar cone woofer |
RECOMMENDED AMPLIFIER POWER | 120 W |
NOMINAL IMPEDANCE | 8 Ohm |
SENSITIVITY (1 w 1m) | 90 dB |
FREQUENCY RESPONSE (-3 dB) on axis | 80 Hz ~ 20 kHz |
FREQUENCY EXTENSION (-10 dB) | 63 Hz ~ 22 kHz |
INPUTS | 63 Hz ~ 22 kHz |
FINISH | Black painted |
DIMENSIONS (HxWxD) mm | 420 x 300 x 135 |
IN THE BOX | Wall mounting brackets |
SET UP YOUR SYSTEM
STEREO SET-UP
The following sketch shows an optimum set-up for a stereo system. The important part here is to place the speakers such that the head of the listener and the two monitors lie at the vertices of an equilateral triangle.
SURROUND SOUND SET-UP
The following sketch shows a 5.1 set-up. It is recommended to have a symmetrical listening position with the front left and right speakers facing the listener and the surround speakers located at the back of the listener.
Distance from walls
While placing speakers, make sure that they are at least 40 cm away from any reflecting surface. This will help minimise bumps in the low-frequency response due to reflections, and also ensure that the rear-mounting port is unobstructed. It is also required to ensure that the heat sinks at the back have adequate ventilation, for uninterrupted operation.