The following sketch shows an optimum set-up for a stereo system. The important part here is to place the speakers such that the head of the listener and the two monitors lie at the vertices of an equilateral triangle.
HIGHLIGHTS
- Aluminium die-cast enclosure
- Inbuilt 130 watt bi-amplifier with DSP balance
- Kevlar woofer
- Custom HF waveguide
- Detailed midrange
- Well defined bass extension
- Stand, Wall mounts (optional)
Downloads
Product Literature: Sonodyne Residential 2015 Product Literature: SRP 200 Series Owners Manual: SRP 203, 204, 205 Product Literature Product LiteratureSpecifications
| DESCRIPTION | 2 way biamplifier speaker |
|---|---|
| ENCLOSURE | Pressure die-cast aluminum |
| TRANSDUCER COMPLEMENTS: HF | Magnetically shielded 26mm silk dome tweeter with custom waveguide |
| TRANSDUCER COMPLEMENTS: LF | Magnetically shielded 6.5" Kevlar cone woofer in die-cast chassis |
| AMPLIFIER THD | < 0.04% |
| RECOMMENDED AMPLIFIER POWER | LF: 80 W, HF: 50 W |
| MAX SPL @ 1M | 107 dB |
| FREQUENCY RESPONSE (-3 dB) on axis | 55Hz ~ 22kHz |
| FREQUENCY EXTENSION (-10 dB) | 45 Hz ~ 25 kHz |
| CROSSOVER FREQUENCY | 2 kHz |
| INPUTS | Fully balanced through XLR & TRS sockets |
| FINISH | Paint (black/ white/ red) |
| COLOURS | Black/ white/ red |
| DIMENSIONS (HxWxD) mm | 340 x 250 x 240 |
| POWER CONSUMPTION | 175 VA max. |
| NET WEIGHT | 11.9 kg |
| FLOOR MOUNT STAND MODEL | SRP FS 2 W/B |
| WALL MOUNT BRACKET | SRP WB2 |
* All specifications are subject to change due to continuous improvements
SET UP YOUR SYSTEM
The following sketch shows a 5.1 set-up. It is recommended to have a symmetrical listening position with the front left and right speakers facing the listener and the surround speakers located at the back of the listener.
Distance from walls
While placing speakers, make sure that they are at least 40 cm away from any reflecting surface. This will help minimise bumps in the low-frequency response due to reflections, and also ensure that the rear-mounting port is unobstructed. It is also required to ensure that the heat sinks at the back have adequate ventilation, for uninterrupted operation.
