SRP 203

Choose your prefered color

Send Enquiry

Overview

With the SRP 203, things start getting more serious. You have a largish room, and you don’t want any compromise. Call on the 203 to deliver uncoloured, undistorted, loud sound that will make the performer proud. And your ears happy.


HIGHLIGHTS

 

  • Aluminium die-cast enclosure
  • Inbuilt 100 watt bi -amplifier with DSP balance 
  • Kevlar woofer 
  • Custom HF waveguide 
  • Detailed midrange
  • Tight & defined bass response 
  • Stand, wall mounts (optional)

Specifications

DESCRIPTION 2 way biamplifier speaker
ENCLOSURE Pressure die-cast aluminum
TRANSDUCER COMPLEMENTS: HF Magnetically shielded 26mm silk dome tweeter with custom waveguide
TRANSDUCER COMPLEMENTS: LF Magnetically shielded 5.25" Kevlar cone woofer in die-cast chassis
AMPLIFIER THD < 0.04%
RECOMMENDED AMPLIFIER POWER LF: 50W, HF: 50W
MAX SPL @ 1M 104 dB
FREQUENCY RESPONSE (-3 dB) on axis 65 Hz ~ 22 kHz
FREQUENCY EXTENSION (-10 dB) 50 Hz ~ 25 kHz
CROSSOVER FREQUENCY 2.5 kHz
INPUTS 1 x fully balanced XLR, 1 x unbalanced RCA socket
FINISH Paint (black/ white/ red)
COLOURS Black/ white/ red
DIMENSIONS (HxWxD) mm 279 x 210 x 181
POWER CONSUMPTION 100 VA max.
NET WEIGHT 6.8 kg
FLOOR MOUNT STAND MODEL SRP FS 1 W/B
WALL MOUNT BRACKET SRP WB2

* All specifications are subject to change due to continuous improvements

SET UP YOUR SYSTEM

The following sketch shows an optimum set-up for a stereo system. The important part here is to place the speakers such that the head of the listener and the two monitors lie at the vertices of an equilateral triangle.

Figure 3: stereo set-up >

The following sketch shows a 5.1 set-up. It is recommended to have a symmetrical listening position with the front left and right speakers facing the listener and the surround speakers located at the back of the listener.

< Figure 4: Surround sound set-up

Distance from walls

While placing speakers, make sure that they are at least 40 cm away from any reflecting surface. This will help minimise bumps in the low-frequency response due to reflections, and also ensure that the rear-mounting port is unobstructed. It is also required to ensure that the heat sinks at the back have adequate ventilation, for uninterrupted operation.

More SRP 200 SERIES Products

Explore Similar Products