SRP 500

MRP: Rs. 42,750.00
Send Enquiry

Overview

The SRP 500 is a new compact near field active reference monitor. This SRP excels at monitoring effects and other such subtleties in the mix. The enclosure is pressure die cast aluminum that maximizes rigidity and lends it a unique form. The silk dome tweeter is nested in a custom waveguide to produce on and off axis linearity and a wide, detailed soundstage. The 5.25" kevlar woofer produces deep bass and exceptional transient response. A new 50 + 50 watt biamplifier drives the transducers optimally while providing adequate headroom and dynamics. The maximum SPL measures in at an impressive 104dB. DSP based internal processing with high quality ADC and DAC is employed for the crossover and also provides the 0.75dB step calibrated HF and LF room compensation EQs at the rear. On the front is a level control ranging from mute to +6dB with centre detent at 0dB. Tapped inserts at the rear and bottom allow for various mounting options. The SRP 500 accepts both XLR and TRS balanced inputs and is available in the following durable powder coat finishes: rich black, charcoal grey or snow white.

Highlights

  • Rigid Aluminum die cast enclosure
  • Class AB: Biamplifier 5.25" kevlar woofer
  • 1" HF in custom waveguide
  • Discrete EQ in 0.75 dB steps
  • Internal DSP balance

Downloads

Product Literature: Sonodyne Reference Owners Manual: SRP 500, 600, 800 Product Literature

Specifications

DESCRIPTION 2 way biamplifier speaker
ENCLOSURE Pressure die-cast aluminum, vented, through front-firing aerodynamic port
TRANSDUCER COMPLEMENTS: HF Magnetically shielded 26mm silk dome tweeter with custom waveguide
TRANSDUCER COMPLEMENTS: LF Magnetically shielded 5.25" kevlar cone woofer in die-cast chassis
AMPLIFIER POWER BEFORE CLIPPING LF: 50 W, HF: 50 W
AMPLIFIER THD AT RATED POWER < 0.04%
MAX SPL @ 1M 104 dB
FREQUENCY RESPONSE 58 Hz ~ 21 kHz (+/- 2 dB)
USABLE FREQUENCY RANGE (-10 dB) 50 Hz ~ 25 kHz
CROSSOVER FREQUENCY 2.5 kHz
CMRR >65 dB
INPUTS Fully balanced through XLR & TRS sockets
INPUT LEVEL FOR 90 dB SPL @ 1M +5 dBU
CONTROLS - FRONT Power Switch, Gain Control
CONTROLS - REAR Low shelving, High shelving, Bass roll-off
PROTECTION Over current, Overheat , RFI, Switch on/ off transients
INDICATOR Power ON /OFF
GAIN CONTROL RANGE -70 dB ~ +10 dB, 0 dB at (detented) centre
HIGH SHELVING EQ 4 kHz ~ 20 kHz, -3 dB ~ +3 dB in 0.75 dB steps
LOW SHELVING EQ 50 Hz ~ 250 Hz, -3 dB ~ +3 dB in 0.75 dB steps
BASS ROLL-OFF 100 Hz, 12 dB/ octave
SIGNAL TO NOISE RATIO (AT UNITY GAIN) > 90 dB, referred to full output
FINISH Powder coated (grey/white/black)
DIMENSIONS (HxWxD) mm 279 x 210 x 181
POWER CONSUMPTION 100 VA Max.
POWER REQUIREMENT 230 VAC, ±10%, 50 Hz, 120 V optional
NET WEIGHT 6.8 kg
WALL MOUNT BRACKET SRP WB2
MOUNTING OPTIONS 2 x M6 inserts on rear, 4 x M6 inserts on bottom

* All specifications are subject to change due to continuous improvements

Set up your system

The following sketch shows an optimum set-up for a stereo system. The important part here is to place the speakers such that the head of the listener and the two monitors lie at the vertices of an equilateral triangle.

Figure 3: stereo set-up >

The following sketch shows a 5.1 set-up. It is recommended to have a symmetrical listening position with the front left and right speakers facing the listener and the surround speakers located at the back of the listener.

< Figure 4: Surround sound set-up

Distance from walls

While placing speakers, make sure that they are at least 40 cm away from any reflecting surface. This will help minimise bumps in the low-frequency response due to reflections, and also ensure that the rear-mounting port is unobstructed. It is also required to ensure that the heat sinks at the back have adequate ventilation, for uninterrupted operation.

More SRP SERIES Products