SRP 350

Send Enquiry

Overview

The SRP 350 is the starting reference. In a world where majority of music is experienced via multimedia, this SRP serves as an ideal reference. It is also an excellent solution for high quality multichannel audio in premium spaces. The enclosure is pressure die cast aluminum that maximizes rigidity and lends it a unique form. The tweeter is a silk dome. The 3.5" glass fibre cone woofer produces impressive LF and transient response. A new 15 + 15 watt biamplifier drives the transducers optimally while providing adequate headroom and dynamics. Room compensation HF and LF tilts are available on the rear along with a power switch and level control. Tapped inserts at the rear and bottom allow for various mounting options. The SRP 350 accepts XLR balanced and RCA unbalanced inputs and is available in the following durable powder coat finishes: rich black, charcoal grey or snow white.

Highlights

  • Rigid Aluminum die cast enclosure
  • Class AB: Biamplifier
  • 3" glass fibre woofer
  • High, Low Shelving EQs

Downloads

Product Literature: Sonodyne Reference Owners Manual: SRP 350 400 Product Literature

Specifications

DESCRIPTION 2 way bi-amplifier speaker
ENCLOSURE Pressure die-cast aluminum, sealed
TRANSDUCER COMPLEMENTS: HF Magnetically shielded 26mm silk dome tweeter mounted on waveguide
TRANSDUCER COMPLEMENTS: LF Magnetically shielded 3" glass fibre cone woofer
AMPLIFIER POWER BEFORE CLIPPING LF: 15 W, HF: 15 W
AMPLIFIER THD AT RATED POWER < 0.1 %
MAX SPL @ 1M 95 dB
FREQUENCY RESPONSE 95 Hz ~ 22 kHz (+/-2 dB)
USABLE FREQUENCY RANGE (-10 dB) 80 Hz ~ 25 kHz
CROSSOVER FREQUENCY 2.7 kHz
CMRR > 65 dB
INPUTS Fully balanced through XLR & TRS sockets, unbalanced RCA
INPUT LEVEL FOR 90 dB SPL @ 1M +2 dBU
CONTROLS - REAR Gain, Power, Bass tilt, Treble tilt
PROTECTION Over current, Overheat , RFI, Switch on/ off transients
INDICATOR Power ON /OFF
GAIN CONTROL RANGE -∞ to +6 dB, 0 dB at center position
SIGNAL TO NOISE RATIO (AT UNITY GAIN) > 90 dB, referred to full output
FINISH Powder coated (grey/white/black)
COLOURS Grey/ White/ Black
DIMENSIONS (HxWxD) mm 184 x 125 x 120
POWER CONSUMPTION 45 VA Max.
POWER REQUIREMENT 230 VAC, ±10%, 50 Hz; 120 V optional
NET WEIGHT 2.5 kg
WALL MOUNT BRACKET SRP WB1
MOUNTING OPTIONS 2 x M6 inserts on rear 4 x M6 inserts on base

* All specifications are subject to change due to continuous improvements

Set up your system

The following sketch shows an optimum set-up for a stereo system. The important part here is to place the speakers such that the head of the listener and the two monitors lie at the vertices of an equilateral triangle.

Figure 3: stereo set-up >

The following sketch shows a 5.1 set-up. It is recommended to have a symmetrical listening position with the front left and right speakers facing the listener and the surround speakers located at the back of the listener.

< Figure 4: Surround sound set-up

Distance from walls

While placing speakers, make sure that they are at least 40 cm away from any reflecting surface. This will help minimise bumps in the low-frequency response due to reflections, and also ensure that the rear-mounting port is unobstructed. It is also required to ensure that the heat sinks at the back have adequate ventilation, for uninterrupted operation.

More SRP SERIES Products