AMD 200

Send Enquiry

Overview

With an impressive 12 inputs the Australian Monitor AMD200 will give installers untold flexibility in a 1 RU mixer amplifier

Featuring 8 balanced Mic/Line level inputs each with 34V DC phantom power available and 4 dual RCA program source inputs and delivering 200 watts at 100 volt, 70 volt, 8 ohm and 4 ohm. With on board tones (Bell, Pre-Announce, Alert and Evac), remote master VCA, Vox triggered output (assignable to any one or combination of mic/line ins), 24DVC back up power input and low power contact closure, the Australian Monitor AMD200 has all the features of the smaller AMD100 compact class D amplifier.

The AMD200 also boasts the power of on board DSP processing, the connectivity of third party control via the RS485 port, which supports the Australian Monitor ICON CP control panel or allows connection to a third party control system and a USB port for setup or for PC control.

Highlights

  • 8 mic/line inputs + 4 Stereo source inputs
  • Stereo line output + Mono amplifier output (Constant voltage or Low impedance operation)
  • 1 RU Class D design
  • 60 Hz – 20 kHz frequency response amplifier output (20 Hz - 20 kHz Line level output)
  • Low power contact closure
  • DSP processing on board with Parametric EQ, compressor, delay and high and low pass ļ¬lters
  • Third party control via serial, Software GUI or via Icon-CP control panel
  • Remote VCA master volume control
  • Mic/Line inputs have 34 volt phantom power

Downloads

Owners Manual

Specifications

DESCRIPTION DSP amplifier
RATED POWER 100 W (70 V/ 100 V/ 4 Ohm/ 8 Ohm)
FREQUENCY RESPONSE 20 ~ 20 kHz; MIC/LINE INPUTS -->AMPLIFIER OUTPUT 60 ~ 20 kHz; STEREO INPUTS -->LINE LEVEL OUTPUT 20 ~ 20 kHz, STEREO INPUTS -->AMPLIFIER OUT: 60 ~ 20 kHz, -3 dB (signal input - 2 dB below clip)
MAX INPUT MIC/:LINE: 22 dBu (Mic/ Line pad on), 2 dBu (Mic/ Line pad on); STEREO INPUT: 6 dBu
POWER OUTPUT 4 Ohm: 200 W (28.28 Vrms); 8 Ohm: 200 W (40 Vrms); 70 V: 200 W; 100 V: 200 W
OUTPUTS LINE LEVEL OUTPUT 10 dBU (Balanced (+4 dBu unbalanced on each leg)
CROSSTALK > 80 dB (1 kHz, input channel at clip, measured on line output of adjacent clip)
TONE CONTROLS
SIGNAL TO NOISE RATIO MIC/LINE INPUT: > 92 dB (A-weighted, to line and amp output 20 Hz ~ 20 kHz); STEREO INPUT: > 91 dB (A-weighted, to line and amp output 20 Hz ~ 20 kHz)
INPUT IMPEDANCE MIC: 1.5 kOhm; LINE: 1.5 kOhm; STEREO INPUT: 12 kOhm
THD MIC/LINE INPUTS -->LINE LEVEL OUTPUT <0.05% (0dB gain, signal input - 2dB below clip) MIC/LINE INPUTS -->LINE LEVEL OUTPUT <0.1% (45dB gain, signal input - 2dB below clip) MIC/LINE INPUTS -->AMPLIFIER OUTPUT <0.5% (signal input - 2dB below clip) STEREO IN
PHANTOM POWER +34 VDC (available via individual switch on each mic/ line channel)
DIMENSIONS (HxWxD) mm 44 x 430 x 330
POWER SOURCE AC Mains (230V ~ 240V/ 115V ~ 120V) or +24VDC
POWER CONSUMPTION GREEN: 9 W; IDLE: 15 W; 1/8th POWER: 48 W; 1/3rd POWER: 83 W (No control panel attached, 4 Ohm load)
NET WEIGHT 7 kg

* All specifications are subject to change due to continuous improvements

More AMD SERIES Products