AMD 100

Send Enquiry

Overview

The Australian monitor AMD100 is a feature packed, compact 1 RU Class D amplifier

Featuring the power of on board DSP processing, the connectivity of third party control via the RS485 port and the ability to support either the Australian Monitor ICON CP control panel or allow connection to a third party control system and a USB port for setup or for PC control. The Australian Monitor AMD100 represents the future of constant voltage amplification.

Highlights

  • 4 mic/line inputs + 4 Stereo source inputs
  • Stereo line output + Mono amplifier output (Constant voltage or Low impedance operation)
  • 1 RU Class D design
  • 60 Hz – 20 kHz frequency response amplifier output (20 Hz - 20 kHz Line level output)
  • Low power contact closure
  • DSP processing on board with Parametric EQ, compressor, delay and high and low pass filters
  • Third party control via serial, Software GUI or via Australian Monitor Icon-CP control panel
  • Remote VCA master volume control
  • Mic/Line inputs have 34 volt phantom power

Downloads

Owners Manual

Specifications

DESCRIPTION DSP amplifier
RATED POWER 100 W (70 V/ 100 V/ 4 Ohm/ 8 Ohm)
FREQUENCY RESPONSE 20 ~ 20 kHz; MIC/LINE INPUTS -->AMPLIFIER OUTPUT 60 ~ 20 kHz; STEREO INPUTS -->LINE LEVEL OUTPUT 20 ~ 20 kHz, STEREO INPUTS -->AMPLIFIER OUT: 60 ~ 20 kHz, -3 dB (signal input - 2 dB below clip)
MAX INPUT MIC/:LINE: 22 dBu (Mic/ Line pad on), 2 dBu (Mic/ Line pad on); STEREO INPUT: 6 dBu
POWER OUTPUT 4 Ohm: 100 W (20 Vrms); 8 Ohm: 100 W (28.28 Vrms) ; 70 V: 100 W; 100 V: 100 W
OUTPUTS LINE LEVEL OUTPUT: 10 dBU (Balanced (+4 dBu unbalanced on each leg)
CROSSTALK > 80 dB (1 kHz, input channel at clip, measured on line output of adjacent clip)
TONE CONTROLS
SIGNAL TO NOISE RATIO MIC/LINE INPUT: > 92 dB (A-weighted, to line and amp output 20 Hz ~ 20 kHz); STEREO INPUT: > 91 dB (A-weighted, to line and amp output 20 Hz ~ 20 kHz)
INPUT IMPEDANCE MIC: 1.5 kOhm; LINE: 1.5 kOhm; STEREO INPUT: 12 kOhm
THD MIC/LINE INPUTS -->LINE LEVEL OUTPUT <0.05% (0dB gain, signal input - 2dB below clip) MIC/LINE INPUTS -->LINE LEVEL OUTPUT <0.1% (45dB gain, signal input - 2dB below clip) MIC/LINE INPUTS -->AMPLIFIER OUTPUT <0.5% (signal input - 2dB below clip) STEREO IN
PHANTOM POWER +34 VDC (available via individual switch on each mic/ line channel)
DIMENSIONS (HxWxD) mm 44 x 430 x 330
POWER SOURCE AC Mains (230 V ~ 240 V/ 115 V ~ 120 V) or +24 VDC
POWER CONSUMPTION GREEN: 9 W (No control panel attached, 4 Ohm load); IDLE: 15 W (No control panel attached, 4 Ohm load); 1/8th POWER: 32 W (No control panel attached, 4 Ohm load); 1/3rd POWER: 60 W (No control panel attached, 4 Ohm load)
NET WEIGHT 6 kg

* All specifications are subject to change due to continuous improvements

More AMD SERIES Products