AM42P

Send Enquiry

Overview

The Australian Monitor AM42P is a 1 RU four channel Class D power amplifier design. The AM42P delivers 200 watts per channel into 100 volt, 70 volt or 4 ohms. The AMD42P features front panel signal presence, clip and fault indication per channel, rear panel level controls and remote master VCA per channel.

Highlights

  • 1 RU, Class D design
  • 200W per channel @ 100V, 70V or 4 ohm
  • Mono or Bridge mode operation
  • Balanced phoenix inputs
  • Voltage controlled input attenuation (VCA)
  • Universal switchmode PSU with PFC

Downloads

Owners Manual

Specifications

DESCRIPTION 4 x 200 W, 4 Ohm amplifier
NO. OF CHANNELS 4
OUTPUT POWER @ 4 OHMS 4 x 200 W (Load direct, all channels driven)
OUTPUT POWER @ 8 OHMS 4 x 116 W (Load direct, all channels driven)
OUTPUT POWER @ 70V/ 100V 4 x 200 W (Line out, all channels driven)
AMPLIFIER CLASS Class D
FREQUENCY RESPONSE 20 Hz (+/- 5 kHz) ~ 25 kHz (+/- 2 kHz) @ 1 kHz rated power into 4 Ohms; 80 Hz (+/-20 kHz) ~ 15 kHz (+/- 2 kHz) @ 1 kHz rated power into 70/100 V
POWER BANDWIDTH
INPUT POWER SUPPLY 90 ~ 264 V/ 50 ~ 60 Hz, universal input
OUTPUT REGULATION
CROSSTALK > 68 dB (@ 1 kHz, A-weighted)
SIGNAL TO NOISE RATIO > 95 dB (A-weighted)
THD 0.5% (1 kHz, @ -3 dB)
OUTPUT VOLTAGE 28.28 V (1 kHz, 4 Ohm) per channel; At rated power: 30.46 V (1 kHz, 8 Ohm) per channel
OUTPUT CURRENT 7.07 A (1 kHz, 4 Ohm) per channel; At rated power: 3.80 A (1 kHz, 8 Ohm) per channel
DIMENSIONS (HxWxD) mm 44 x 482 x 440
POWER CONSUMPTION
NET WEIGHT 7 kg

* All specifications are subject to change due to continuous improvements

More AM SERIES Products