SRT 101

Send Enquiry

Overview

The SRT 101 is a high quality compact speaker. From a compact enclosure it delivers unprecdented SPL, dynamics, and frequency bandwidth. It can be used for all channels for installation in small rooms. In larger rooms, it can be used for surround channels. The SRT 101 must be used in conjuction with the SRT 101 CS.


HIGHLIGHTS

 

  • 2 way passive speaker with dedicated controller
  • Aluminium-wood hybrid enclosure
  • Kevlar LF driver
  • High frequency nested in custom waveguide

 

Specifications

DESCRIPTION 2 way shallow profile surround speaker
TRANSDUCER COMPLEMENTS: HF 26mm silk dome neodymium magnet tweeter with waveguide
TRANSDUCER COMPLEMENTS: LF 1 x 6" Kevlar cone woofer
RECOMMENDED AMPLIFIER POWER 120 W
NOMINAL IMPEDANCE 8 Ohm
SENSITIVITY (1 w 1m) 90 dB
FREQUENCY RESPONSE (-3 dB) on axis 80 Hz ~ 20 kHz
FREQUENCY EXTENSION (-10 dB) 63 Hz ~ 22 kHz
INPUTS 63 Hz ~ 22 kHz
FINISH Black painted
DIMENSIONS (HxWxD) mm 420 x 300 x 135
IN THE BOX Wall mounting brackets

* All specifications are subject to change due to continuous improvements

Set up your system

The following sketch shows an optimum set-up for a stereo system. The important part here is to place the speakers such that the head of the listener and the two monitors lie at the vertices of an equilateral triangle.

Figure 3: stereo set-up >

The following sketch shows a 5.1 set-up. It is recommended to have a symmetrical listening position with the front left and right speakers facing the listener and the surround speakers located at the back of the listener.

< Figure 4: Surround sound set-up

Distance from walls

While placing speakers, make sure that they are at least 40 cm away from any reflecting surface. This will help minimise bumps in the low-frequency response due to reflections, and also ensure that the rear-mounting port is unobstructed. It is also required to ensure that the heat sinks at the back have adequate ventilation, for uninterrupted operation.

Explore Similar Products