Australian Monitor AM42P

Send Enquiry

Overview

The Australian Monitor AM42P is a 1 RU four channel Class D power amplifier design. The AM42P delivers 200 watts per channel into 100 volt, 70 volt or 4 ohms. The AMD42P features front panel signal presence, clip and fault indication per channel, rear panel level controls and remote master VCA per channel.

Highlights

1 RU, Class D design
200W per channel @ 100V, 70V or 4 ohm
Mono or Bridge mode operation
Balanced phoenix inputs
Voltage controlled input attenuation (VCA)
Universal switchmode PSU with PFC

Downloads

Owners Manual

Specifications

DESCRIPTION	4 x 200 W, 4 Ohm amplifier
NO. OF CHANNELS	4
OUTPUT POWER @ 4 OHMS	4 x 200 W (Load direct, all channels driven)
OUTPUT POWER @ 8 OHMS	4 x 116 W (Load direct, all channels driven)
OUTPUT POWER @ 70V/ 100V	4 x 200 W (Line out, all channels driven)
AMPLIFIER CLASS	Class D
FREQUENCY RESPONSE	20 Hz (+/- 5 kHz) ~ 25 kHz (+/- 2 kHz) @ 1 kHz rated power into 4 Ohms; 80 Hz (+/-20 kHz) ~ 15 kHz (+/- 2 kHz) @ 1 kHz rated power into 70/100 V
POWER BANDWIDTH
INPUT POWER SUPPLY	90 ~ 264 V/ 50 ~ 60 Hz, universal input
OUTPUT REGULATION
CROSSTALK	> 68 dB (@ 1 kHz, A-weighted)
SIGNAL TO NOISE RATIO	> 95 dB (A-weighted)
THD	0.5% (1 kHz, @ -3 dB)
OUTPUT VOLTAGE	28.28 V (1 kHz, 4 Ohm) per channel; At rated power: 30.46 V (1 kHz, 8 Ohm) per channel
OUTPUT CURRENT	7.07 A (1 kHz, 4 Ohm) per channel; At rated power: 3.80 A (1 kHz, 8 Ohm) per channel
DIMENSIONS (HxWxD) mm	44 x 482 x 440
POWER CONSUMPTION
NET WEIGHT	7 kg